Rubber fender

Our company specializes in air bag and rubber fender, which are made of raw materials that manufactured by our company. Our prod  Rubber Fender D=1.5m L= 3.0m Innitial Pneumatic Pressure 0.05Mpa Reaction Force 597KN Energy Absorption 153KJ  

  Rubber Fender

Specifications performance and weight of pneumatic rubber fender

Specification D×Lm	Initial pneumatic pressure 0.05Mpa			Initial pneumatic pressure 0.08Mpa
	Sphere Weight(KG)	R(KN)	GEA(KJ)	Sphere Weight(KG)	R(KN)	GEA(KJ)
0.5×1.0	25	64	6	25	85	8
0.6×1.0	32	74	8	32	98	11
0.7×1.5	50	137	17	50	180	24
1.0×1.5	80	182	32	80	239	45
1.0×2.0	100	257	45	125	338	63
1.2×2.0	120	297	63	165	390	88
1.35×2.5	165	427	102	226	561	142
1.5×3.0	315	579	153	370	761	214
1.7×3.0	405	639	191	436	840	287
2.0×3.5	590	875	308	632	1150	430
2.5×4.0	1050	1381	663	1110	1815	925
2.5×5.5	1333	2019	943	1410	2653	1317
3.0×5.0	1880	2000	1050	2155	2709	1571
3.0×6.0	2160	2488	1312	2470	3292	1888
3.3×4.5	2020	1884	1175	2300	2476	1640
3.3×6.0	2300	2783	1675	2600	3652	2338
3.3×6.5	2700	3015	1814	3080	3961	2532
3.3×10.6	4403	5257	3067	5020	6907	4281
4.5×9.0	6554	5747	4752	7470	7551	6633
4.5×12.0	8739	7984	6473	9960	10490	9037
Note: The weight is the fender weight (excluding protective sleeve), with weight error of±10% and counterforce error pf±10%

Specifications of others can be customized according to customer required

  

 Structure of pneumatic rubber fender for ship

                                 

Out adhesive: Protective cord layer and inner adhesive have high tensile strength and abrasion resistance .

Cord layer : Strong layer of the pneumatic rubber fender is made from winding the high strength polyamide fibre cord fabric .

Inner adhesive : The cord layer of pneumatic rubber fender assures no gas leakage from the compressor .

End-flange: The end-flange is a part to fix air valve component ,buried metal part and the cord layer and used for hoisting ,and filling ans discharging gas .The structure of the end-flange is shown in Fig .

Note about applying Pneumatic rubber fender

1.Frenquently check whether the airbag spheroid is damaged and whether the pressure is normal ,and the valve core must be replaced every six months.

2.The steel wire should wrap the rubber pipe ,when tying steel wire to pneumatic rubber fender in case the the fender is stabbed .

3. The surace or subject next to the pneumatic rubber fender cant be hard and sharp-point in case the fender is stabbed .

4. The accessories and jips nut cant be loose when testing the internal pressure .

5. When applying the pneumatic rubber fender ,the rope net should be reliable ,the steel wire used for hanging metal parts and the hook link cant be tied in disorder .

Storage of Pneumatic rubber fender

1. When not using for a long time ,wash the fender surface ,dry up and fill in sufficient right amount of compressed air to lay in a cool ,dry and well-ventilated place .

2. The storage place of pneumatic rubber fender should be far away from heat source .

3. Try to keep fender away from acid ,alkali,grease and organic solvents.

4. When not applying the fender ,the pneumatic rubber fender cant be piled up and heavy itiems cant be piled on the fender .

 

 Rubber Fender

Rubber fender